현재 위치
홈
특징 (Features)
l
GRS-6052A: DC-50MHz 대역폭,
100MSa/s,2KW/CH*2
GRS-6032A:
DC-30MHz 대역폭,
100MSa/s, 2KW/CH*2
l
200MSa/s 실시간 샘플링 속도
l
획득모드 : 피크 탐지,Envelop,지속
l
0~10div의 Pre 트리거 주파수
l
100s/div의 롤 모드
l
10개의 파형
저장/ Recall 메모리(REFO_REF9)
l
평균 기능(2~256)
l
ON/OFF 스무딩 기능
l
10ns/div 최대 Sweep 속도
l
ALT-MAG 기능 (*5,*10*20)
l
커서 리드아웃 기능
: △V,
△T, 1/
△T
l
10개의 패널 설정 저장
/ Recall 기능 (M0~M9)
l
VERT 모드 트리거링
l
RS-232C 인터페이스
|
상세설명
(Description)
The GRS-6000A Series is a Real-Time/Digital Storage Oscilloscope, which provides both analog and digital storage features in one product. As original signals correctly represent and quickly update, the GRS-6000A Series allows users simultaneously to savie the waveform. With Equivalent Time Sampling at 500MSa/s, the GRS-6000A Series are capable of reconstructing repetitive waveforms up to 50MHz/30MHz in an accurate and detailed fashion. The waveform storage could be done just by pressing the RUN-STOP button, or through the Single Trigger mode which captures single-shot events. 10 Reference Waveforms can be saved and recalled for waveforms comparison. Numerous functions, such as Average, Pre-Trigger, Roll mode, Peak Detect, Envelop, Persistence, and X-Y mode, are available to meet various measurement applications. The RS-232C Interface and the free Remote Control Software enable monitoring, remote controlling, and storing waveforms in PC. | |
ANALOG + DIGITAL STORAGE | |
GRS-6000A Series Real-Time digital storage oscilloscope provides both analog and digital storage features in one product. It is extremely useful for applications requiring real time measurements (analog mode) and waveform storage functions (digital mode) at the same time. With a maximum 500MSa/s equivalent time sample rate, the GRS-6000A Series is able to accurately reconstruct waveforms up to 50MHz (GRS-6052A) and 30MHz (GRS-6032A). | |
DIGITAL STORAGE | |
WhenRUN STOP button is
pressed or Single Trigger mode is used, waveforms can be conveniently
captured. Up to 10 reference waveforms can be saved for waveform comparison.
With proven analog technology, functions, such as Average, Pre-Trigger, Roll
mode, and X-Y mode, offer the flexibility of digital
features. | |
GRS-6000A Series provides a pre-trigger function, which allows you to observe pre-triggered waveforms up to 10 divisions ahead of the trigger point. | |
The low-speed transient events from an input signal can be easily seen under the ROLL Mode. The waveform will roll on from right to left to show input signal continuously with a roll time of up to 100s/division. | |
With ALT-MAG function, you can expand waveforms by 5, 10 or 20 times for detailed waveform observation. Both the original waveform and expanded waveform can be shown on the screen simultaneously. | |
RS-232C AND REMOTE CONTROL SOFTWARE | |
When remote control software through the RS-232C interface is active, waveforms on the oscilloscope screen can be displayed and updated on a PC screen. The graphic user interface provides an easy platform for remote control. All waveform data can be converted into BMP, PCX, TIFF, PNG, or JPEG files for documentation and analysis |
사양
(Specification)
GRS-6052A |
GRS-6032A | |||||||||||||||||||||
CRT | ||||||||||||||||||||||
Type and Acceleration |
6-inch CRT,
10kV |
6-inch CRT,
2kV | ||||||||||||||||||||
Illumination | Front panel control | |||||||||||||||||||||
Z-axis Input | Sensitivity : at
least 5V Polarity : positive going input decreases intensity Max. input voltage:30V(DC+ACpeak) | |||||||||||||||||||||
Input Impedance : approx. 33kΩ | Input Impedance : approx. 47kΩ | |||||||||||||||||||||
VERTICAL SYSTEM | ||||||||||||||||||||||
Deflection Coefficient and Accuracy | 1mV ~ 2mV/div ±5%,
5mV ~ 20V/div ±3%, 14 steps in 1-2-5 sequence | |||||||||||||||||||||
Variable Continuity | 2.5 : 1 ~ min. 50V/div | |||||||||||||||||||||
Bandwidth (-3dB) | 1mV ~ 2mV/div: DC~7MHz 5mV ~ 20V/div: DC~50MHz |
1mV ~ 2mV/div: DC~7MHz 5mV ~ 20V/div: DC~30MHz | ||||||||||||||||||||
Vertical Mode | CH1, CH2, DUAL (ALT or CHOP) | |||||||||||||||||||||
Chopper Frequency | Approx. 250kHz | |||||||||||||||||||||
Sum or Difference | CH1+CH2, CH1-CH2 | |||||||||||||||||||||
Invert | CH2 | |||||||||||||||||||||
Input Impedance | 1MΩ ±2%//approx. 25pF | |||||||||||||||||||||
Input Coupling | AC, DC, GND | |||||||||||||||||||||
Input Voltage | Max. 400V(DC+ACpeak) | |||||||||||||||||||||
HORIZONTAL SYSTEM | ||||||||||||||||||||||
Sweep Time | 0.2μs/div ~ 0.5s/div, 20 steps | |||||||||||||||||||||
Variable Continuity | 2.5 : 1 up to 1.25s/div (uncal.) | |||||||||||||||||||||
Accuracy | ±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG | |||||||||||||||||||||
Sweep Magnification | x5, x10, x20 | |||||||||||||||||||||
Max. Sweep Time | 20ns/div (10ns/div uncal) | 50ns/div (10ns~40ns/div uncal) | ||||||||||||||||||||
ALT-MAG Function | Yes | |||||||||||||||||||||
HOLD-OFF Time | Variable | |||||||||||||||||||||
TRIGGER | ||||||||||||||||||||||
Trigger Mode | AUTO, NORM, TV | |||||||||||||||||||||
Trigger Source | VERT, CH1, CH2, LINE, EXT | |||||||||||||||||||||
Trigger Coupling | AC, HFR, LFR | |||||||||||||||||||||
Trigger Slope | “+”or“ - ”polarity | |||||||||||||||||||||
ALT Trigger | Yes | |||||||||||||||||||||
Indicator Trigger LED | Yes | |||||||||||||||||||||
TV Sync. Separator | TV-V“-”, TV-H“ - ” | |||||||||||||||||||||
Trigger
Sensitivity |
| |||||||||||||||||||||
External Trigger
Input |
Input impedance
:Approx. 1MΩ//25pF (AC coupling) Max. input voltage : 400V (DC + ACpeak) | |||||||||||||||||||||
X-Y OPERATION | ||||||||||||||||||||||
Input | X-axis : CH1 ; Y-axis : CH2 | |||||||||||||||||||||
Sensitivity | 1mV/div ~ 20V/div | |||||||||||||||||||||
Bandwidth | X-axis : DC ~ 500kHz (-3dB) | |||||||||||||||||||||
X-Y Phase Shift | <3° from DC ~ 50kHz | |||||||||||||||||||||
DIGITAL STORAGE | ||||||||||||||||||||||
Acquisition Digitizer | 8 bit ADC x 2 | |||||||||||||||||||||
Max. Sampling
Rate |
500MSa/s for
equivalent time sampling 100MSa/s for normal sampling | |||||||||||||||||||||
Storage Bandwidth | Single shot: DC ~ 25MHz Repetitive: DC ~50MHz |
Single shot: DC ~ 25MHz Repetitive: DC ~30MHz | ||||||||||||||||||||
Dynamic Range | ±5div | |||||||||||||||||||||
Memory Length- Acquisition Memory | 2k words/CH x 2, 1k words/CH(equivalent) | |||||||||||||||||||||
Memory Length- Save REF Memory | 1k words/CH x 10 with back-up memory (REF0~REF9) | |||||||||||||||||||||
Memory Length- Display Memory | 1k words/CH x 4 waveform(max.) | |||||||||||||||||||||
Sweep Time | Equivalent:
0.2μs/div ~ 0.5μs/div Normal Sample: 1μs/div ~ 0.1s/div Roll: 0.2s/div ~ 100s/div | |||||||||||||||||||||
Sweep Magnification | x 5, x 10, x 20 | |||||||||||||||||||||
Max.Sweep Time | 10ns/div | |||||||||||||||||||||
MAG Interpolation | DOTS, LINEAR | |||||||||||||||||||||
ALT-MAG Function | Yes | |||||||||||||||||||||
Acquire Mode | Sample, peak detect(>25ns), Envelop. Persist, Average(2~256) | |||||||||||||||||||||
Operation Mode | Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop | |||||||||||||||||||||
Smoothing Function | Dot joint ON/OFF selectable | |||||||||||||||||||||
Pre-Trigger | Pre-trigger 0 ~10div in 0.02div steps | |||||||||||||||||||||
X-Y Operation | X-axis: CH1 Y-axis: CH2 | |||||||||||||||||||||
Storage Bandwidth | DC~50MHz(-3dB) | |||||||||||||||||||||
Display Resolution | H: 100points/div;
V: 25points/div; X-Y: 25 x 25 points/div | |||||||||||||||||||||
SAVE/ RECALL | ||||||||||||||||||||||
Panel Setting | 10 sets(M0 ~M9) | |||||||||||||||||||||
Waveform | 10 sets(REF0~REF9) | |||||||||||||||||||||
READOUT & CURSOR | ||||||||||||||||||||||
Cursor Measurement | ΔV, ΔT, 1/ ΔT | |||||||||||||||||||||
Readout Intensity | Adjustable | |||||||||||||||||||||
OUTPUT SIGNAL | ||||||||||||||||||||||
CH1 Signal Output | Voltage : approx.
20mV/div (with 50Ω terminated) Bandwidth : 50Hz ~ 5MHz | |||||||||||||||||||||
Calibrator
Output |
Voltage : 0.5V±3%
Frequency : approx. 1kHz, square wave | |||||||||||||||||||||
INTERFACE | ||||||||||||||||||||||
RS-232C | ||||||||||||||||||||||
POWER SOURCE | ||||||||||||||||||||||
AC 100V/120V/230V±10%, 50/60Hz | ||||||||||||||||||||||
DIMENSIONS & WEIGHT | ||||||||||||||||||||||
275(W) x 130(H) x 370(D) mm; Approx. 8.5kg |
배송안내
- 배송비 : 기본배송료는 3,000원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다) 100,000원 이상 구매시 무료배송입니다.
- 본 상품의 평균 배송일은 0일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
- 본 상품의 배송 가능일은 0일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
교환 및 반품안내
- 상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 상품수령후 7일 이내라도 교환 및 반품이 불가능합니다.
- 저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
- 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
- 신발의 경우, 실외에서 착화하였거나 사용흔적이 있는 경우에는 교환/반품 기간내라도 교환 및 반품이 불가능 합니다.
- 수제화 중 개별 주문제작상품(굽높이,발볼,사이즈 변경)의 경우에는 제작완료, 인수 후에는 교환/반품기간내라도 교환 및 반품이 불가능 합니다.
- 수입,명품 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다.
- 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.
환불안내
AS안내
- 소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.
- A/S는 판매자에게 문의하시기 바랍니다.
이미지 확대보기
[GRS-6000 Series] Real-Time / Digital Storage Oscilloscope (2모델/6052A/6032A)
비밀번호 인증
글 작성시 설정한 비밀번호를 입력해 주세요.
확인장바구니 담기
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?